Meet Maestro Version History

This document describes the changes in each released version of Meet Maestro.

➧ Desktop Application: When an update for the Meet Maestro™ Desktop application is available, it will automatically be downloaded and an "Update Version" button will appear in the top bar to prompt installation. Installation is quick and the application will relaunch when finished.

>>Note: The Meet Maestro Desktop application is necessary when running Meet Maestro with external timing systems.

➧ Web Browser: When running Meet Maestro™ via a web browser, updates are published automatically. Whenever you open (or refresh) a Meet Maestro window you'll have the latest version. If an update is published after Meet Maestro is opened, an "Update Version" button will appear in the top bar to prompt a window refresh.

You can check the current version of your Meet Maestro software by clicking the "Gear" icon in the top right, then view the version number in the bottom left of the window, below the "Logout" button.

 

 

---

Version 8.7.0 (Web)
November 22, 2023 9:48am CDT

• New feature: Add ability to add record books within Meet Maestro

---

Version 8.6.0 (Desktop and Web)
October 27, 2023 12:37pm CDTOctober 27, 2023 12:37pm CDT

Download Latest Desktop Installer

• New Feature: Remote troubleshooting and diagnostics gathering

---

Version 8.5.1 (Desktop and Web)
October 24, 2023 3:47pm CDT

Download Latest Desktop Installer

• Adds multiple serial port selection support
• Add support for more flexible time entry formats, e.g. "1.23.10" -> "1:23.10"

---

Version 8.5.0 (Desktop and Web)
October 15, 2023 10:39am CDT

Download Latest Desktop Installer

• Add beta support for Daktronics Omnisport timing system

 

---

Version 8.4.5 (Desktop and Web)
July 29, 2023 10:14am CDT

Download Latest Desktop Installer

• Increase timeout for reading data from CTS consoles (to address infrequent 'data integrity check' errors)
  
  

---

Version 8.4.3 (Desktop and Web)
July 23, 2023 11:06pm CDT

Download Latest Desktop Installer

• Fix issue that could erroneously exclude some grouped events from the Results report

 

---

Version 8.4.2 (Desktop and Web)
July 20, 2023 11:39am CDT

Download Latest Desktop Installer

• Fixes Session filter on Meet Summary report

---

Version 8.4.1 (Desktop and Web)
June 28, 2023 2:58pm CDT

Download Latest Desktop Installer

• Fixes spacing issues for split height reports like Timer Sheets
• Fixes "Name for label" displayed in Meet Setup when meet name is longer than 36 characters
  
  

---

Version 8.4.0 (Desktop and Web)
June 27, 2023 3:55pm CDT

Download Latest Desktop Installer

• New feature: Add ability to edit seeding and scoring rules within Meet Maestro
• New feature: when opening athlete entries editor from within an event, that current event is now highlighted in the pop-up window to make entry editing/scratching easier
• New keyboard shortcut: In dropdown/select controls for Team and Session, typing the team or session names will now jump to first matching entry in the list
• Fix: Correct formatting for timer sheets and judge place forms so that when 2-events per page are selected, the pages are divided exactly in half, for easier cutting
• Fix: Correctly display estimated start time for a break, when the event following the break has no heats
• Fix: the "Paper Size" selection menu in report options no longer has an unnecessary search field

---

Version 8.3.2 (Desktop and Web)
June 25, 2023 4:07pm CDT

Download Latest Desktop Installer

• Update styling of Settings > Athletes table to improve readability and consistency
• Update PDF rendering dependency (used for label reports)

---

Version 8.3.1 (Desktop and Web)
June 23, 2023 7:22pm CDT

Download Latest Desktop Installer

• Fix feature activation for CTS Gen 7 timing console

---

Version 8.3.0 (Desktop and Web)
June 19, 2023 5:39pm CDT

Download Latest Desktop Installer

• Fixes issue that could prevent loading times from CTS timing systems
• New feature: Display athlete availability status in relay editor
• New feature: Visual indication of incomplete relays
• Improved error handling

 

---

Version 8.2.2 (Desktop and Web)
June 16, 2023 4:55pm CDT

Download Latest Desktop Installer

• Updates Settings > Athletes, now clicking athlete name opens the Entries editor
• Fine-tunes report option defaults to disable most display options (e.g. heat place, reaction time, splits) by default
• Temporarily removes the "Meet Participation" label option (introduced in 8.2.0), while that feature is being revisited

 

---

Version 8.2.1 (Desktop and Web)
June 11, 2023 10:45am CDT

Download Latest Desktop Installer

• Fixes "include DQ" option on Participation Labels report (was broken by v8.2.0)

 

---

Version 8.2.0 (Desktop and Web)
June 9, 2023 10:35pm CDT

Download Latest Desktop Installer

• New feature: Add/edit/delete teams

• New feature: "Meet participation" label option
• Fixes:
  • Closing settings now returns to previous event
  • A4 paper size
  • Avoid blank last page when printing many reports

 

---

Version 8.1.1 (Desktop and Web)
May 23, 2023 7:43am CDT

Download Latest Desktop Installer

• Fixes "too many meets" errors in CTS timing consoles

 

---

Version 8.1.0 (Desktop and Web)
May 16, 2023 3:54pm CDT

Download Latest Desktop Installer

• Adds ability to edit Points and scoring configuration in Meet Maestro

---

Version 8.0.3 (Desktop and Web)
May 16, 2023 8:14am CDT

Download Latest Desktop Installer

• Heat Sheet report fixes:

  • In 2 and 3 column display modes, now displays relay names in two sub-columns to provide more room for names and age details

---

Version 8.0.2 (Desktop and Web)
April 30, 2023 3:55pm CDT

Download Latest Desktop Installer

• High Points report fixes:

  • now reports points from grouped events
  • age range and competition category filters now work with "Open" age groups option
  • report will now include athletes with relay points but no individual event points

---

Version 8.0.1 (Desktop and Web)
April 17, 2023 12:01pm CDT

Download Latest Desktop Installer

• Improves resiliency related to server/cloud (API) communication.

 

---

Version 7.0.15 (Desktop and Web)
January 12, 2023 5:53am CDT

Download Latest Desktop Installer

• Previous heat button was incorrectly jumping to the first heat when crossing event boundaries instead of going to the last heat of the previous event.

---

Version 7.0.14 (Desktop and Web)
December 21, 2022 4:44pm CDT

Download Latest Desktop Installer

• Added links to the Meet Maestro marketing page from the login screen
• Updated the logo and styling of the login screen and related screens

---

Version 7.0.13 (Desktop and Web)
December 20, 2022 2:44pm CDT

Download Latest Desktop Installer

• CTS Gen7: Correct how 'Individual Medley' events are written to the Gen7 event sequence

---

Version 7.0.11 (Desktop and Web)
December 20, 2022 12:17pm CDT

Download Latest Desktop Installer

• Fix an edge case in the CTS Gen7 'write event sequence' process

---

Version 7.0.10 (Desktop and Web)
December 20, 2022 9:57am CDT

Download Latest Desktop Installer

• CTS Gen7 improvements:
  
  • Improve meet detection and selection
  • Fix issue causing repeated 'event sequence has loaded' messages in the Gen7
  • Fix issue which could cause the Gen7 crash while Maestro was initializing the connection
• Eliminate duplicate 'loaded data for empty lanes' messages in the System 5/6 and Gen7 timing system bar
• Fix issue which would sometimes cause Maestro to crash when switching from the timing system setup screen to the time entry interface

---

Version 7.0.9 (Desktop and Web)
December 16, 2022 12:10pm CDT

Download Latest Desktop Installer

• Improve CTS System 5/6 and Gen 7 device detection
• Add 'Restart Maestro' button to the CTS System 5/6 and Gen 7 'fatal error' page
• Security patches

---

Version 7.0.8 (Desktop and Web)
December 16, 2022 8:30am CDT

Download Latest Desktop Installer

• Don't display 'null' or empty parenthesis when athlete age is not specified

---

Version 7.0.7 (Desktop and Web)
December 6, 2022 6:42am CDT

Download Latest Desktop Installer

• Fix editing of swim and backstroke start estimations
• Fix session delete button
• Fix ‘download pending updates’ and ‘download timing system logs’ buttons
• Minor style improvements
• Meet name and location were defaulting to blank values in the meet settings form

---

Version 7.0.3 (Desktop and Web)
November 25, 2022 10:30am CDT

Download Latest Desktop Installer

• Minor security updates
  

---

Version 7.0.2 (Desktop and Web)
November 18, 2022 6:00pm CDT

Download Latest Desktop Installer

• Fix issue which caused the 'One File Per Team' option in 'Finish & Export' > Downloads to do nothing
  
• Fix issue which caused the single team options on 'Finish & Export' > Downloads  to create an empty file

 

---

Version 7.0.1 (Desktop and Web)
November 15, 2022 8:25am CDT

Download Latest Desktop Installer

Fix the text in the race select drop down for the System 5/6 and Gen 7 timing system bars

---

Version 7.0.0 (Desktop and Web)
November 8, 2022 6:00am CDT

Download Latest Desktop Installer

1. New Feature: Scheduled Breaks
   
2. New Feature: Create, edit, delete athletes in Maestro (Deck Add Athletes)
3. Improve error handling for CTS System 5/6 and Gen 7 initialization issues
4. Security and performance improvements

---

Version 6.2.1 (Desktop and Web)
September 26, 2022 8:25am CDT

Download Latest Desktop Installer

1. Minor performance improvement
   

---

Version 6.2.0 (Desktop and Web)
September 23, 2022 5:48pm CDT

Download Latest Desktop Installer

1. Add the ability to delete an imported session.

---

Version 6.0.0 (Desktop and Web)
September 5, 2022 8:05pm CDT

Download Latest Desktop Installer

1. Improvements to how estimated start times are synchronized between Meet Maestro instances and the mobile app

---

Version 5.65.1 (Desktop and Web)
September 3, 2022 8:30am CDT

Download Latest Desktop Installer

1. Improve stability of data synchronization
   

---

Version 5.65.0 (Desktop and Web)
August 1, 2022 1:40pm CDT

Download Latest Desktop Installer

1. Updates labels from "Gender" to "Competition Category" to more clearly separate competitive classification from gender identity, and to align with similar shifts in terminology used by USA Swimming and FINA.

 

---

Version 5.63.3 (Desktop and Web)
July 29, 2022 2:45pm CDT

Download Latest Desktop Installer

1. Preparation for future awesomeness

---

Version 5.63.1 (Desktop and Web)
July 21, 2022 4:50pm CDT

Download Latest Desktop Installer

1. Minor bug fixes

---

Version 5.63.0 (Desktop and Web)
July 14, 2022 2:05pm CDT

Download Latest Desktop Installer

1. Add 'Heat Places' option to the Results Report
2. Improve column alignment of lanes without entrants on the time entry table

---

Version 5.62.1 (Desktop and Web)
July 11, 2022 2:26pm CDT

Download Latest Desktop Installer

1. Fix issue causing 'NaN' to be displayed on the meet summary report
2. Only count participating athletes on the meet summary report

---

Version 5.62.0 (Desktop and Web)
July 6, 2022 1:51pm CDT

Download Latest Desktop Installer

1. Show team abbreviation in athlete check-in report
2. Add 'Place' to sorting options for award labels
3. Fix a bug with the heat place filter in reports
4. Show team abbreviation in athlete check-in report
5. Fix age display for single-age events on the records report

---

Version 5.61.2 (Desktop and Web)
July 1, 2022 8:10am CDT

Download Latest Desktop Installer

1. Support '0' as a valid input for judged points
2. Fix bug causing page number to increment unexpectedly on the Meet Summary report

---

Version 5.61.1 (Desktop and Web)
June 28, 2022 7:35am CDT

Download Latest Desktop Installer

1. Fixes a bug which would cause place filters for label reports to incorrectly exclude some results

---

Version 5.61.0 (Desktop and Web)
June 28, 2022 6:10am CDT

Download Latest Desktop Installer

1. Add a new 'Meet Summary' report
2. Add a new 'Time Standards Achievement Labels' report
3. Fix a regression in 5.60.0 which broke labels for atypical relays (all back, breast, or fly). Sorry!

 

---

Version 5.60.2 (Desktop and Web)
June 24, 2022 9:25am CDT

Download Latest Desktop Installer

Fixes an issue preventing the creation of a new session via a results file when the file contained meet details (course and date) that were different from the current Meet Maestro meet. The confirmation screen to confirm they selected the desired file.

 

---

Version 5.60.0 (Desktop and Web)
June 23, 2022 2:15pm CDT

Download Latest Desktop Installer

1. Add clarifying messages to the TimeDrops configuration form regarding expected times per lane and timing system configuration file errors
2. Add exhibition badges to place judging form
3. Add a new page in settings which allows re-scoring ranges of events
4. New empty heats are no longer marked as exhibition

---

Version 5.59.4 (Web)
June 16, 2022 6:45pm CDT

Download Latest Desktop Installer

1. Fix labels for atypical relays (all back, breast, or fly)

---

Version 5.59.3 (Desktop and Web)
June 15, 2022 3:47pm CDT

Download Latest Desktop Installer

1. More stability improvements

---

Version 5.59.2 (Desktop and Web)
June 10, 2022 4:41pm CDT

Download Latest Desktop Installer

1. Stability improvements when operating with intermittent network connections

---

Version 5.59.0 (Desktop and Web)
June 7, 2022 3:55pm CDT

Download Latest Desktop Installer

1. Add exhibition tag ('EXH') to heats and lanes that are non-scoring based on the meet's scoring rules.
2. Add 'show empty lanes' option to the Heat Sheets report. This will include empty lanes in the Heat Sheet report, which some teams find helpful in the ready bench.
3. Add a gender filter to the Timer Sheets report which enables printing timer sheets on colored paper based on gender.
4. Add support for older browser versions (Chrome versions back to 2019). Note: We highly recommend enabling auto update in Chrome to gain security fixes.

---

Version 5.57.1 (Desktop and Web)
June 2, 2022 7:30am CDT

Download Latest Desktop Installer

1. Fixes a minor display alignment issue on the time adjustment interface

---

Version 5.57.0 (Desktop and Web)
May 31, 2022 12:14pm CDT

Download Latest Desktop Installer

1. Add a heat place filter to the Place Judge Form

---

Version 5.56.2 (Desktop and Web)
May 30, 2022 2:55pm CDT

Download Latest Desktop Installer

1. Minor cosmetic bug fix

---

Version 5.56.0 (Desktop and Web)
May 28, 2022 12:07pm CDT

Download Latest Desktop Installer

1. Fixes filtering bugs with the Status and Age columns on the Settings -> Athletes page
2. If you experience network issues while logging in or when loading early pieces of data, you will now see improved error messages and an easier way to reload Maestro.

 

---

Version 5.55.1 (Desktop and Web)
May 25, 2022 7:30am CDT

Download Latest Desktop Installer

Heat sheet visibility in the mobile app is now configurable in Meet Maestro. By default they are not visible, which allows meet directors and coaches to review heat sheets and make final changes before publishing. When publishing the heat sheets to the mobile app you can opt to send a 'heat sheets are ready' notification to the participating athletes and parents.

 

Mobile app settings indicators have been added to the footer. The footer now shows:

1. Whether the heat sheets are visible in the mobile app
2. Whether upcoming swim and results notifications are enabled
3. Whether mobile app "guests" can find the meet in the public meet search. "Guests" are mobile app users who do not have a SwimTopia login for one of the competing teams (grandparents, friends, etc).

 

---

Version 5.53.2 (Desktop and Web)
May 20, 2022 11:58am CDT

Download Latest Desktop Installer

1. When in manual heat place mode and using the tab / enter key to move between fields, sometimes the manual heat place field would lose focus requiring use of the mouse. Hot key ninjas rejoice, the mouse is no longer needed in this scenario.
2. Improve background data loading so that it is more resilient on sketchy network connections. 

---

Version 5.53.1 (Desktop and Web)
May 18, 2022 9:15am CDT

Download Latest Desktop Installer

1. Fixes a few rare occurrence issues which would cause some reports to halt and require a restart to fix.

---

Version 5.53.0 (Desktop and Web)
May 13, 2022 8:00am CDT

Download Latest Desktop Installer

1. The timing system configuration page for Wylas, CTS Dolphin, Time Drops now has a button to copy the selected file system folder to the clipboard.
2. Fix bugs making the add/edit athlete and relay modals more robust. There were rare circumstances related to running Maestro on different computers for the same meet which would cause these modals to 'lock up' or not save as expected.

 

---

Version 5.52.0 (Desktop and Web)
May 10, 2022 4:55pm CDT

Download Latest Desktop Installer

When testing a timing system prior to the meet start it was possible to send upcoming swim notifications prematurely. Now, if a timing system sets the current heat before the meet start time, Meet Maestro will ask the user to confirm that they wish to start the meet early.

 

---

Version 5.51.7 (Desktop and Web)
May 6, 2022 3:03pm CDT

Download Latest Desktop Installer

1. Fix a bug preventing setting judged heat place, overall place, and points
2. Fix a bug which prevented saving the meet or session forms more than once in a row
3. Update the styling of our "your CTS Dolphin software is out of date" message to make it look less scary
4. Fix a bug which would occasionally cause the 'Load Times' button on the timing system bar to stop activating when using our Time Drops integration

---

Version 5.51.6 (Desktop and Web)
May 5, 2022 9:05am CDT

Download Latest Desktop Installer

1. Fix a bug in our Wylas integration which was keeping the result time from saving automatically when importing data.

---

Version 5.51.5 (Desktop and Web)
May 4, 2022 4:00pm CDT

Download Latest Desktop Installer

1. Small tweak to a timing system integration file which changes no functionality but makes development easier.

---

Version 5.51.4 (Desktop and Web)
May 4, 2022 9:00am CDT

Download Latest Desktop Installer

1. Fix a bug in the Wylas timing system integration which would cause Meet Maestro to interpret times with '0' in the hundredths places incorrectly.

---

Version 5.51.3 (Desktop and Web)
May 3, 2022 9:00am CDT

Download Latest Desktop Installer

1. Enable pressing enter/return to save the selected DQ value in the DQ modal.

---

Version 5.51.2 (Desktop and Web)
May 2, 2022 8:31am CDT

Download Latest Desktop Installer

1. Fix a bug which was causing entering DQ's to be unreliable.

---

Version 5.51.1 (Desktop and Web)
April 29, 2022 1:30pm CDT

Download Latest Desktop Installer

1. Fix a bug which prevented editing the start time intervals on the meet and session settings pages.

---

Version 5.51.0 (Desktop and Web)
April 27, 2022 12:19pm CDT

Download Latest Desktop Installer

1. Technology upgrades to bring developer happiness (no user facing changes)

---

Version 5.50.2 (Desktop and Web)
March 16, 2022 7:30am CDT

Download Latest Desktop Installer

1. Minor bug fixes

---

Version 5.50.1 (Desktop and Web)
February 11, 2022 7:50am CDT

Download Latest Desktop Installer

1. Add the ability to toggle the display of men's, women's, and combined scores on the team scores report
2. Adjust GPU acceleration settings which resolves an issue preventing the app from loading for some desktop users
3. Improve timing system configuration help messages for the Dolphin timing system

 

---

Version 5.49.1 (Desktop Only)
January 17, 2022 7:36pm CDT

Download Latest Desktop Installer

1. For the last release, 5.48.5 was accidentally deployed for the desktop app. This deploys the changes in 5.49.0 for real this time!

---

Version 5.49.0 (Desktop and Web)
January 13, 2022 2:40pm CDT

Download Latest Desktop Installer

1. Minor improvement to the Wylas Timing integration

---

Version 5.48.5 (Desktop and Web)
January 12, 2022 11:30am CDT

Download Latest Desktop Installer

1. Fix a bug which would prevent Maestro from importing times from Wylas for lanes which only had a touch pad time and no backup times.

 

---

Version 5.48.4 (Desktop and Web)
December 16, 2021 8:45am CDT

Download Latest Desktop Installer

1. Fix a minor bug in our CTS System 5/6 and Gen7 support which showed up in our error logs but was not likely to cause any issues a user would notice.

---

Version 5.48.2 (Desktop and Web)
December 8, 2021 2:20pm CDT

Download Latest Desktop Installer

1. Fix a bug in CTS Gen7 support which would prevent the event sequence from programming properly.

---

Version 5.48.1 (Desktop and Web)
December 8, 2021 10:20am CDT

Download Latest Desktop Installer

1. Improved CTS Gen7 support

---

Version 5.47.0 (Desktop and Web)
December 6, 2021 8:40am CDT

Download Latest Desktop Installer

1. Feature: When Maestro fails to find a CTS timing console, it will now display a list of ports and any error messages that occurred while attempting a connection.
2. Bug Fix: After certain types of CTS timing console initialization failures, the 'retry connection' button would not really retry.
3. Feature: Maestro will now display the selected CTS meet in the timing system bar. This should help prevent the case where the wrong meet is selected.
4. Bug Fix: Sometimes after changing the selected CTS meet, the 'select a race' drop down (next to the load times button) would break and not display the correct list of options.

 

---

Version 5.46.0 (Desktop and Web)
November 19, 2021 3:00pm CDT

Download Latest Desktop Installer

1. Adjust how time zones are formatted for the Time Drops integration

---

Version 5.45.3 (Desktop and Web)
November 16, 2021 1:30pm CDT

Download Latest Desktop Installer

1. Fixes an issue which could cause CTS Console initialization to fail with the message, 'Could not find requested meet'.

---

Version 5.45.1 (Desktop and Web)
October 28, 2021 4:30pm CDT

Download Latest Desktop Installer

1. Fixed an issue which would cause server errors when editing seed times for entries created by certain file imports
2. Fixed an issue causing seed times to be displayed in the wrong course in the edit athlete / edit relay modals when the seed time course did not match the session's course
3. Improve the robustness of the CTS Timing Console integration

---

Version 5.44.0 (Desktop and Web)
October 11, 2021 10:45am CDT

Download Latest Desktop Installer

1. Add support for Wylas Timing (https://wylas-timing.com/)
2. Upgrade Time Drops integration to add support for splits (https://time-drops.com/)

---

Version 5.43.0 (Desktop and Web)
October 1, 2021 1:30pm CDT

Download Latest Desktop Installer

1. Add the ability to export scoreboard start list files (.scb)
2. Small bug fixes

---

Version 5.42.0 (Desktop and Web)
September 15, 2021 3:54pm CDT

Download Latest Desktop Installer

1. Boring housekeeping that lays groundwork for future awesome things.

---

Version 5.37.0 (Desktop and Web)
July 16, 2021 11:26am CDT

Download Latest Desktop Installer

1. Fixes a bug preventing time standards from displaying in the event headers in some reports (Psych Sheets and others)
2. Record Books now convert into the course of the meet (for virtual meets) or the session (for non-virtual meets). Note that this conversion always happens, even for Record Books in SwimTopia which do not allow converted times. A future release will improve this further.

---

Version 5.36.1 (Desktop and Web)
July 13, 2021 8:50am CDT

Download Latest Desktop Installer

1. Virtual meets with sessions that have non-matching courses will now use time standards in the course of the meet. Regular multi-session meets will continue to use time standards in the course of the session.

---

Version 5.36.0 (Web Only)
July 9, 2021 6:15pm CDT

1. Fixes Participation Labels - "Exhibition/Non-placing only" option to include results from non-scoring heats and lanes

---

Version 5.35.0 (Desktop and Web)
June 29, 2021 5:15pm CDT

Download Latest Desktop Installer

1. Adds support for athlete numbers to the time entry interface and reports

---

Version 5.34.2 (Web Only)
June 28, 2021 9:05am CDT

1. Fix a bug which caused the place filter in reports to not work properly in overall place mode

---

Version 5.34.1 (Desktop and Web)
June 25, 2021 5:44pm CDT

Download Latest Desktop Installer

1. Fix spelling mistake. Yikes!

---

Version 5.34.0 (Desktop and Web)
June 24, 2021 11:09am CDT

Download Latest Desktop Installer

1. Add a redundant data synchronization mechanism for when our primary mechanism fails

---

Version 5.33.4 (Desktop and Web)
June 24, 2021 8:50am CDT

Download Latest Desktop Installer

1. Award labels should display the course of the meet in the event description for virtual meets
2. Only display selected record books for the record books report
3. Other minor bug fixes

---

Version 5.33.3 (Desktop and Web)
June 23, 2021 4:15pm CDT

Download Latest Desktop Installer

1. Fixes a bug introduced June 22 which would cause the Award Labels report to exclude non-scoring heats when using the Award Type: Heat Place option.

---

Version 5.33.2 (Desktop and Web)
June 23, 2021 3:15pm CDT

Download Latest Desktop Installer

1. Always use the meet course in the results report event headers. In some virtual meets it would display the course from different sessions causing the course to vary from event to event. The actual results were being displayed in meet course so there is no impact to placing or scoring.
2. When reloading the app and pending updates are detected, apply the updates to the UI immediately rather than after saving to the server.

---

Version 5.33.0 (Desktop and Web)
June 23, 2021 10:21am CDT

Download Latest Desktop Installer

1. Cache pending updates sooner in the update / save lifecycle. This should ensure that regardless of the type of network failure no data can be lost.
2. Fixes two bugs in the restore pending updates from cache feature which caused issues when handling new entries or new splits when restoring after restarting the app.

---

Version 5.32.1 (Desktop and Web)
June 22, 2021 2:30pm CDT

Download Latest Desktop Installer

1. Improve the fidelity of Maestro's offline detection. It can now detect situations where the computer is connected to wifi but does not have access to the internet or SwimTopia's servers.

---

Version 5.32.0 (Desktop and Web)
June 22, 2021 10:30am CDT

Download Latest Desktop Installer

1. Add place filters to the Participation Labels report
2. Fixes bugs which would cause the loss of pending updates when the user's authentication token expired or, in some circumstances, when reloading the app.

 

---

Version 5.31.0 (Desktop and Web)
June 21, 2021 11:03am CDT

Download Latest Desktop Installer

1. Create a new 'Help' page with links to help center articles and ways of contacting our Customer Happiness Team.
2. Add a mechanism to download 'pending updates'. What are 'pending updates'? When Maestro is offline, it will save pending updates on the user's computer. Then when it detects it is back online, Maestro will save those pending updates to the cloud. As an extra redundancy this update enables users to download these pending updates and save them in a location of their choosing.

---

Version 5.30.0 (Desktop and Web)
June 18, 2021 10:30am CDT

Download Latest Desktop Installer

1. Improve how Maestro handles errors when saving data especially when connected using slow or spotty internet

Version 5.28.0 (Desktop and Web)
June 16, 2021 8:32am CDT

Download Latest Desktop Installer

1. When opening the athlete entries modal from the settings area all events are displayed. This was especially confusing in virtual meet where each session has matching events. In this case we now display a session label with the event information to help disambiguate the events.
2. Add a heat range filter to the award labels report

Version 5.27.1 (Desktop and Web)
June 15, 2021 5:00pm CDT

Download Latest Desktop Installer

1. Fixes another edge case in how seed times are displayed in psych sheets and results for virtual meets with non-matching courses and/or correction factors

Version 5.27.0 (Desktop and Web)
June 15, 2021 3:42pm CDT

Download Latest Desktop Installer

1. Add support for importing SD3 result files to create sessions in virtual meets
2. Add event type filter to high scorers report

Version 5.26.1 (Desktop and Web)
June 15, 2021 11:58am CDT

Download Latest Desktop Installer

1. Limit CTS Timing Console event sequence names to a max of 20 characters

Version 5.26.0 (Desktop and Web)
June 14, 2021 3:40pm CDT

Download Latest Desktop Installer

1. Add additional settings to the mobile app page to enable configuring upcoming swim and result notifications.

---

Version 5.25.4 (Desktop and Web)
June 12, 2021 3:54pm CDT

Download Latest Desktop Installer

1. The Desktop version of the last build was an accidental re-post of 5.25.2.

---

Version 5.25.3 (Desktop and Web)
June 12, 2021 3:39pm CDT

Download Latest Desktop Installer

1. Fix a nasty bug which would break the display in Maestro for relay events with time standards.

---

Version 5.25.2 (Desktop and Web)
June 10, 2021 4:51pm CDT

Download Latest Desktop Installer

1. Treat heats with only scratches as seeded not partially complete. This makes the Maestro UI less confusing and the heat sheet more accurate in the mobile app, especially when scratches are done hours before the meet starts.

---

Version 5.25.1 (Desktop and Web)
June 10, 2021 12:07pm CDT

Download Latest Desktop Installer

1. For Virtual Meets with sessions of courses, the psych sheets and results report now show the seed times converted into the course of the meet.

---

Version 5.25.0 (Desktop and Web)
June 10, 2021 7:15am CDT

Download Latest Desktop Installer

1. Add the ability to turn a normal meet into a virtual meet and score it using Maestro. When competing in a virtual meet against a non-Maestro team, the Maestro team can now accept an hy3 results file from the other team and import it as a new session in their Maestro meet. The meet will then be scored as a virtual meet.
2. Make it easier to clear codes (NT, DNF, etc) in the result entry row menu by adding a check mark next to the active code and by clearing the code when clicking on it in the menu.

---

Version 5.24.2 (Desktop and Web)
June 4, 2021 3:33pm CDT

Download Latest Desktop Installer

1. Improve the judged place inputs to make them easier to see
2. Ensure the judged place inputs boxes are disabled when the meet is locked

---

Version 5.24.1 (Desktop and Web)
June 2, 2021 11:27am CDT

Download Latest Desktop Installer

1. Fix missing lane number in timer sheets

---

Version 5.24.0 (Desktop and Web)
June 2, 2021 9:55am CDT

Download Latest Desktop Installer

1. Add a Timer Verification report

---

Version 5.23.0 (Desktop and Web)
May 27, 2021 2:30pm CDT

Download Latest Desktop Installer

1. Minor style tweaks and new error handling messages

---

Version 5.22.0 (Desktop and Web)
May 24, 2021 2:30pm CDT

Download Latest Desktop Installer

1. Make the reseed events form session aware and require a confirmation before reseeding events with results.
2. Other minor bug and typo fixes.

---

Version 5.20.2 (Desktop and Web)
May 19, 2021 8:45am CDT

Download Latest Desktop Installer

1. Improve how time standards are matched to events so that time standard events with age groups within a event age group range are considered matches.
2. Display age group information with the time standard name in both the time entry page benchmarks section and in report headers. This makes it easier to distinguish between cuts when multiple time cuts from the same time standard match a meet event.

---

Version 5.20.0 (Desktop and Web)
May 13, 2021 3:00pm CDT

Download Latest Desktop Installer

1. Add high scorers report
2. Add link to a SwimTopia mobile app flyer to the mobile app settings page to help encourage use of the mobile app at meets

 

---

Version 5.19.0 (Desktop and Web)
May 11, 2021 1:45pm CDT

Download Latest Desktop Installer

1. Add report display option to control how the printed at timestamp is displayed
2. Adjust the design of the time adjust interface to discourage users from accidentally closing the app when closing the form.
3. Use a smaller font for the benchmarks (records and time standards) in reports

---

Version 5.18.1 (Desktop and Web)
May 10, 2021 3.23pm CDT

Download Latest Desktop Installer

1. Add instrumentation to help investigate an intermittent bug.

---

Version 5.18.0 (Desktop and Web)
May 10, 2021 1:26pm CDT

Download Latest Desktop Installer

1. Add time standards support for the Time Drops timing system option.
2. Timer sheets now display a helpful message when filter options result in no matching events.
3. Fix a bug preventing the timing system links from working properly in the web version.
4. In some cases heat sheets would not render properly if a heat was added in another Maestro instance.
5. Performance improvements to the Maestro server API's.

---

Version 5.17.0 (Desktop and Web)
May 5, 2021 12:52pm CDT

Download Latest Desktop Installer

1. Update timer sheets to add display options for single space and new options for 3, 4, or 5 events per page.

---

Version 5.16.3 (Web Only)
May 4, 2021 10:14am CDT

Download Latest Desktop Installer

1. Ensure time standards and records display in the event headers in heat sheets for grouped events.

---

Version 5.16.2 (Web Only)
May 4, 2021 10:00am CDT

Download Latest Desktop Installer

1. The event number filter in reports should match numeric values to all alpha-numeric events of the same number. For example, '7' should match '7A' and '7B'.
2. In the event of a 3-way tie (or other repeating number fractional tie), the results report should only display one decimal place.

---

Version 5.15.3 (Desktop and Web)
April 30, 2021 10:00am CDT

Download Latest Desktop Installer

1. Adds support for Times Standards!
2. Fixes a bug which would cause a double save after importing times from Dolphin or Time Drops
3. Show the team filter in reports even when there is only one team in the meet. Hiding it in this case caused confusion.

---

Version 5.14.3 (Desktop and Web)
April 21, 2021 8:10am CDT

Download Latest Desktop Installer

1. Fixes a bug preventing sponsor banners from displaying in reports

---

Version 5.14.2 (Desktop and Web)
April 19, 2021 1:50pm CDT

Download Latest Desktop Installer

1. Fixes the meet event structure integration with Time Drops

---

Version 5.14.1 (Desktop and Web)
April 19, 2021 1:01pm CDT

Download Latest Desktop Installer

1. Fix a few minor issues with the Time Drops timing system integration

 

---

Version 5.14.0 (Desktop and Web)
April 19, 2021 6:36am CDT

Download Latest Desktop Installer

1. Add support for the Time Drops timing system

---

Version 5.13.6 (Desktop and Web)
March 23, 2021 3:15pm CDT

Download Latest Desktop Installer

1. Fix minor style issue

---

Version 5.13.5 (Desktop and Web)
March 19, 2021 7:34pm CDT

Download Latest Desktop Installer

1. Windows Only - Fixes a bug related to changing meets which would require an app restart to fix.

---

Version 5.13.2 (Desktop and Web)
March 18, 2021 6:00pm CDT

Download Latest Desktop Installer

1. Fix a bug which was cause the event tracker bar to display the wrong event state in some circumstances.
2. Fix a bug introduced in 5.13.0 which would cause time entry inputs to reset if the user was typing when an update came in from the server.

 

---

Version 5.13.1 (Desktop and Web)
March 18, 2021 10:45am CDT

Download Latest Desktop Installer

Bug fixes and minor style tweaks.

 

---

Version 5.13.0 (Desktop and Web)
March 12, 2021 3:00pm CDT

Download Latest Desktop Installer

No fun features this time, just house keeping and minor bugs.

 

---

Version 5.11.1 (Desktop and Web)
March 10, 2021 9:32am CDT

Download Latest Desktop Installer

1. CTS System 5 & 6 and Gen 7 Updates
   
   • Meets stored in the CTS console which have race data where later races have earlier timestamps than earlier was confusing Maestro and preventing race data from being loaded.
   • Style tweaks to the 'select a meet' list on the console configuration.

---

Version 5.10.0 (Desktop and Web)
March 2, 2021 10:20am CDT

Download Latest Desktop Installer

1. CTS System 5 & 6 and Gen 7 Updates
   
   • Skip blank races when searching for new race data (the timing system will store blank races when accidental starts are registered)
   • Fix a few bugs related to changing lanes or heats after data was loaded from the timing system
   • Don't automatically write the event sequence
   • Add a few debug tools to the configuration page
   • Fix a few bugs around the importing / re-importing of splits
2. Treat zeros from dolphin as blanks instead of times
3. Splits now stay with the lane/heat instead of moving when dragging an athlete or relay between lanes/heats
4. Add new menu options to clear times and codes from the entire heat or lane by lane. This is handy when the times were loaded or entered for the wrong heat.
5. Add the ability to ignore backup times on the Time Adjustment page

---

Version 5.9.5 (Desktop and Web)
February 19, 2021 2:11pm CDT

Download Latest Desktop Installer

1. Minor bug fixes

---

Version 5.9.0 (Desktop and Web)
February 19, 2021 10:58am CDT

Download Latest Desktop Installer

1. Ensure times loaded from automated timing systems display immediately in the results table event when offline
2. General performance improvements

---

Version 5.8.1 (Desktop and Web)
February 16, 2021 8:00am CDT

Download Latest Desktop Installer

1. Fix issue which caused the select input on the time adjustment form to always be blank
2. Improve the fault tolerance of the communications with CTS System 5/6 and Gen 7
3. Ensure timing system configuration forms scroll properly when on small screens
4. Sort CTS System 5/6 and Gen 7 meet options from newest to oldest

---

Version 5.6.0 (Desktop and Web)
February 11, 2021 7:00am CDT

Download Latest Desktop Installer

1. Minor bug fixes

---

Version 5.5.0 (Desktop and Web)
February 9, 2021 11:21am CDT

Download Latest Desktop Installer

1. Added a Place Judge Report
2. Minor style improvements

---

Version 5.4.0 (Desktop and Web)
February 8, 2021 8:30am CDT

Download Latest Desktop Installer

1. Splits!!! Maestro now includes feature rich support for splits including time entry, reports, and file import and export. And of course your splits also transfer seamlessly to your SwimTopia team account.
2. Reports have been updated to be easier to use, support different paper sizes, add new options and filters, and provide better multi-computer support. It is now easier than ever to have a "labels / printer only" computer which automatically stays in sync with the main time input computer.
3. The CTS Dolphin timing setup has been updated to be easier to use.
4. Adds beta support for CTS System 5/6 and CTS Gen 7. This feature is in private beta, but reach out to our Customer Happiness Team if you are interested in participating or receiving updates as we get closer to a public release.
5. Adds a new result row menu which provides an alternative way to set status codes (no show, did not finish, etc).
6. Adds a new Time Adjustment interface which is used to make and document corrections that might be necessary due to heat or lane timing equipment malfunction.
7. Adds a way to toggle the visibility of the timers without leaving the time entry interface.

---

Version 4.1.10 (Desktop and Web)
January 28, 2021 3:45pm CDT

Download Latest Desktop Installer

1. Fixes an issue causing estimated start times to display incorrectly in heat sheets and other reports.

---

Version 4.1.8 (Web Only)
January 13, 2021 1:23pm CDT

1. Disable lane changes while offline (we will revisit enabling this in the future)
2. Add improved messaging in the app about our lack of diving support. We plan to add great diving event support in the future.

---

Version 4.1.7 (Desktop and Web)
January 6, 2021 3:45pm CDT

Download Latest Desktop Installer

1. Add a special error message screen when attempting to view a meet with the wrong login. Previously the app would display a loading spinner forever.

---

Version 4.1.6 (Desktop and Web)
December 10, 2020 10:00am CDT

Download Latest Desktop Installer

1. Fixes a bug which broke the toggle switches on mobile app settings page
2. Fixes a bug preventing the override of the Dolphin race number

---

Version 4.1.5 (Desktop and Web)
November 25, 2020 12:38pm CDT

Download Latest Desktop Installer

1. Fix an issue which caused the results file export option 'one for each team' to fail.

---

Version 4.1.3 (Desktop and Web)
November 24, 2020 3:26pm CDT

Download Latest Desktop Installer

1. Improve login form error messaging when the app is offline
2. Enable the selection of a blank folder when picking the Dolphin directory
3. Fix minor animation issues

---

Version 4.1.1 (Desktop and Web)
November 23, 2020 4:03pm CDT

Download Latest Desktop Installer

1. Shorten dates on labels and reports so they fit better.
2. Fix an issue which would cause strange behavior in the app after moving an athlete or relay team between lanes.

---

Version 4.0.6 (Desktop and Web)
November 20, 2020 6:15am CDT

Download Latest Desktop Installer

1. Huge performance improvements! This update radically reduces the initial meet load time and eliminates load time, in most cases, when viewing reports and switching between sessions.
2. More of the app works offline including reports and switching between sessions
3. Data is now synchronized in near real time between Maestro instances. See this video demonstration. This enhances any multi-computer/multi-browser use cases such as...
   1. simultaneous virtual meets
   2. using one computer to input times and one to input DQ's
   3. using one browser tab to print reports and one to input results

 

---

Version 3.0.4 (Desktop and Web)
October 26, 2020 6:36am CDT

Download Latest Desktop Installer

1. This release lays the groundwork for future amazing features. No new features or bug fixes.

---

Version 2.30.0 (Desktop and Web)
September 22, 2020 10:20am CDT

Download Latest Desktop Installer

1. Added a mobile app settings page to the settings section. This page enables users to control how the meet is displayed in the SwimTopia mobile app.

---

Version 2.29.1 (Web Only)
September 21, 2020 11:25am CDT

1. Fixes a minor display issue on the download results page which would make it appear that some reports get 'stuck'.

---

Version 2.29.0 (Desktop and Web)
September 18, 2020 2:30pm CDT

Download Latest Desktop Installer

1. Add a session filter to the export results interface. This is helpful when submitting results from certain meets for virtual scoring.

---

Version 2.28.1 (Web)
September 16, 2020 3:40pm CDT

1. Add a race type filter (individual, relay, or all) to the Athlete Check In report

---

Version 2.28.0 (Desktop and Web)
September 16, 2020 7:45am CDT

Download Latest Desktop Installer

1. In the desktop application, label reports now display a full preview and can be printed directly. Previously only a one page preview was displayed.
2. The desktop application will now automatically detect and install updates.
3. Add the ability to edit the meet and session time zones.
4. Performance and stability improvements

---

Version 2.24.0 (Desktop and Web)
August 7, 2020 1:30pm CDT

Download Latest Desktop Installer

1. Improve the document title and filename for label reports
2. Improve the layout of the label reports preview
3. Improvement Labels now compare and display times based on the course (SCY, LCM, etc.) of the session. It was previously using the meet course which was not correct for virtual meets where competing teams have different length pools.

---

Version 2.23.0 (Desktop and Web)
July 31, 2020 3:00pm CDT

Download Latest Desktop Installer

1. In rare circumstances transferring results back to SwimTopia would fail. This release adds an error message in that case and allows you to retry.
2. Improve form validations for relays to prevent a blank heat or invalid lanes.
3. Display entries in invalid lanes in time entry interface (we were hiding them, sorry) so that they can be reassigned to a valid lane. 

---

Version 2.22.1 (Web Only)
July 26, 2020 1:29pm CDT

1. Increases the maximum number of lanes supported from 16 to 32. (This is primarily useful for teams wanting to use Meet Maestro to collect times in an unseeded "time trial" format, making it easier to have larger number of swimmers listed in a single heat for easier time collection)

---

Version 2.22.0 (Desktop and Web)
July 8, 2020 6:18pm CDT

Download Latest Desktop Installer

1. Meet Maestro can now export the Hy-Tek "Merge Results" file format, which provides additional integration options for virtual meets between teams using Meet Maestro and Hy-Tek Meet Manager.

---

Version 2.21.7 (Web Only)
July 6, 2020 4:19pm CDT

1. Fixes issue resulting in Session start time being saved in unexpected time zone.

---

Version 2.21.6 (Desktop and Web)
July 3, 2020 3:35pm CDT
Download Latest Desktop Installer

1. Don't publish the 'live' event and heat updates to the server when meet is locked
2. Enforce uniform width for time blanks in timer sheets
3. Other minor bug fixes

---

Version 2.21.5 (Web)
June 25, 2020 9:30am CDT

1. Minor bug fixes and stability improvements

---

Version 2.21.1 (Desktop and Web)
June 23, 2020 5:16pm CDT
Download Latest Desktop Installer

1. Fixes a bug which prevented Maestro from properly loading CTS Dolphin files (present since 2.20.3).

---

Version 2.21.0 (Desktop and Web)
June 23, 2020 8:00am CDT
Download Latest Desktop Installer

1. Add clarifying meet/session course text to the result table header. This is especially helpful when running virtual meets with pools of different lengths.
2. When changing meet or pool config, Maestro will now automatically recompute official time, place, and points if needed.

---

Version 2.20.6 (Desktop and Web)
June 16, 2020 7:00am CDT
Download Latest Desktop Installer

1. Ensure result time is recomputed immediately when any watch times change. Some users noticed that times could be entered, but the official and result times would be blank. This in turn would cause the event to remain in the 'seeded' or 'partial' state.
2. Heats without entries should be treated as unseeded. This bug would prevent some events for entering the 'scored' state.
3. Provide better defaults for lane count for virtual meets
4. Include "X and under" events in reports when min age filter is set to '1'
5. Improve the initial load performance of session settings form
6. Add course indicators to the result table header when the session course and the meet course diverge
7. Ensure the result table doesn't attempt to save results when the meet is locked

---

Version 2.20.5 (Desktop and Web)
June 11, 2020 3:10pm CDT
Download Latest Desktop Installer

1. Fixed a bug preventing the editing of athlete entries from the athletes page within settings.

---

Version 2.20.3 (Desktop and Web)
June 11, 2020 1:10pm CDT
Download Latest Desktop Installer

1. Added meet and session settings pages. These pages provide greater customization options for single and multi session meets. Notably it enables virtual meets to be swam in different pools with different lengths but scored as though everyone swam together.
2. Moved CTS Dolphin settings to a modal accessible via the timing system bar
3. The session picker in the main navigation bar is no longer displayed when viewing a settings page as it has no relevance there.

---

Version 2.18.0 (Desktop and Web)
May 1, 2020 3:00pm CDT
Download Latest Desktop Installer

1. Fixes a bug causing a random event to display when loading a meet instead of the first event
2. Only display the current session's events as options when editing an athlete's entries for virtual meets
3. Fix a regression which broke the Records report when using the display by 'age group' option

---

Version 2.17.0 (Desktop and Web)
April 30, 2020 2:00pm CDT
Download Latest Desktop Installer

1. Adds support for Virtual Meets!
2. Many reports (heat sheets, etc) now insert page breaks between sessions
3. Entry Labels can be filtered by session
4. Selecting the checkbox to 'Publish current heat & event' in the timing settings page now auto selects the first session 

---

Version 2.16.1 (Web only)
March 27, 2020 2:57pm CDT

1. Meet Results can now be exported in SDIF (.sd3) format.

---

Version 2.16.0 (Desktop and Web)
March 20, 2020 5:56pm CDT
Download Latest Desktop Installer

1. Fixes a bug which would prevent Dolphin timing data from saving properly when importing into a grouped event with times in lanes with no entrants.

---

Version 2.15.0 (Desktop and Web)
March 6, 2020 5:56pm CDT
Download Latest Desktop Installer

1. Fix a few minor edge cases related to entering times
2. Users will now redirect to the initially requested route after logging in. This is especially helpful when using a bookmark or link from SwimTopia.
3. The results table now scrolls when the browser is shorter than the table.
4. Removed the mobile application settings page until a future release.

---

Version 2.14.0 (Desktop and Web)
March 5, 2020 11:39am CDT
Download Latest Desktop Installer

1. Record Books can now be merged into a Maestro meet. Records will then be displayed in the run interface and cause result rows to be highlighted when broken. There are also new and updated reports.
2. Generate Merge Entries files (hy3 format) from within Maestro.
3. The login page is easier to use. It automatically focuses on the cursor on the first input and pressing enter submits the form.
4. Some Mobile Application features are now customizable from within the Maestro settings menu.
5. Fixes bugs that would cause reports to print incorrectly if the browser was zoomed or if the browser had unusual default print margins.

---

Version 2.13.2 (Web only)
February 21, 2020 4:00pm CDT

1. Fix issue causing some meets to display 'Invalid Date' on the transfer results page

---

Version 2.13.1 (Desktop and Web)
February 16, 2020 12:34pm CDT
Download Latest Desktop Installer

1. Implements support for "read-only" access mode.
   • Now users with "swim_meets:read" permissions will have read-only access to Meet Maestro meets (useful for reporting/ribbon volunteers that don't need to make updates to meet data).
2. Updates user interface "drag-handle" icon/indicator

---

Version 2.12.1 (Desktop and Web)
February 14, 2020 4:34pm CDT
Download Latest Desktop Installer

1. Clear "DQ" text from time inputs when clearing the DQ checkbox
2. Fix a bug introduced in 2.11.1 which caused Maestro to load the wrong result files from Dolphin

---

Version 2.11.1 (Desktop and Web)
February 7, 2020 11:39am CDT
Download Latest Desktop Installer

1. Updates language from “Entry” time to “Seed” time
2. Adds a team filter and sponsor banner options to the results report
3. Fixes a bug that would cause drag and drop between lanes or heats to fail for some types of events
4. Updates the ‘how to install the desktop app’ link on the Timing Setup page
5. Expands functionality on the Finish & Export page. Users can now lock / unlock the meet, transfer results to SwimTopia, and download results and advancers files in hy3 format.
6. The ‘Load Times’ button in the timing system bar is now disabled when the meet is locked
7. Other performance and stability improvements

---

Version 2.10.2 (Web only)
September 11, 2019 6:03pm CDT

1. Fixed wrapping issues caused by long date descriptions. A long month name and two-digit day (e.g. "September 10, 2019") could trigger wrapping of the "printed" timestamp in report footers. This wrapped footer would be taller than usual which could trigger less-than-desirable layout issues, most notably it could result in 2-up timer sheets printing as 1-up instead.

---

Version 2.10.1 (Web only)
July 9, 2019 6:08pm CDT

1. Fixes display of Exhibition results, replacing (EXH) badge in place column with simple 'X' to avoid overcrowding.
2. Fixes issue causing Psych Sheet to bleed into neighboring columns in 3-column mode.
3. Adds Meet name and date to header of Psych Sheet.
4. Makes display of relay names on Psych Sheet consistent with Heat Sheet and Results reports.
5. Add display of records (if available) to Psych Sheet
6. Fixes calculation of estimated place in Psych Sheet with converted seed times.

---

Version 2.10.0 (Desktop and Web)
June 29, 2019 10:55pm CDT
Download Latest Desktop Installer

1.  Includes all fixes and features since previous desktop release (2.9.0) into new Windows app installer.

---

 Version 2.9.6 (Web only)
June 29, 2019 3:04pm CDT

1. Adds Session filter to Athlete Check-in, Award Labels, and Improvement Labels reports. Session filter is only shown in multi-session meets.
2. Display Records on Results, including indication of newly broken records. (This is a limited beta feature)
3. Polished the display of the Heat Sheet and Results report to fine-tune formatting.
4. Entry time is now included on the 2-column Results result by default

---

Version 2.9.4 (Web only)
June 28, 2019 12:36am CDT

1. Adds preliminary support for displaying Records on Heat Sheet report. (This feature is in beta-testing and is not yet generally available).

---

Version 2.9.3 (Web only)
June 26, 2019 8:01pm CDT

1. Add Session filter to Heat Sheet, Timer Sheets, Session Report and Psych Sheet reports. Filter is only shown if meet has more than one Session.
2. Hides Session selector in Run meet interface unless meet has more than one Session.

---

Version 2.9.2 (Web only)
June 26, 2019 12:05pm CDT

1. Implemented feature to support Judge's decision/override of calculated points
2. Added visual indicator when heat place, overall place or points are overridden by a judge's decision (a dark grey "dog ear" triangle in the top right, similar to the red entry change indicator)
3. Moved the prev/next event up/down arrows to the right of the event number, to avoid accidental clicking/mouse over of event bar when going to click up/down between events.
4. Minor tweak to the mobile app promotional text in the footer of most reports.
5. Fixed issue that would prevent loading events in athlete entry form in multi-session meets
6. Fixed issue that in some cases would prevent the last few events/heats from printing on heat sheets and potentially other reports.

---

Version 2.9.0 (Desktop and Web)
June 13, 2019 11:25pm CDT
Download Latest Desktop Installer

---

Version 2.8.3 (Web only)
May 30, 2019 10:12am CDT

1. Fixed spacing issue that affected multiple reports. Could result in unexpected/undesirable page breaks. Issue was most noticeable in 2-per page Timer Sheet report, where it would result in inconsistent groupings of events across lanes.

---

Version 2.8.2 (Web only)
May 29, 2019 7:54pm CDT

1. Fixed issue with filter by Event Number range on the Timer Sheet report. Some event number ranges where resulting in no data being returned.

---

Version 2.8.1 (Web only)
May 29, 2019 2:32pm CDT

1. Updated Entry Labels to sort by Event, Heat then Lane (instead of by Event then Athlete Name)
2. Updated Entry Labels to generate one label per Relay Team (in relay events) and show all relay team members in order

---

Version 2.8.0 (Desktop and Web)
May 23, 2019 7:18pm CDT
Download Latest Desktop Installer

---

Version 2.7.1 (Web only)
May 22, 2019 10:11am CDT

1. Fixed issue preventing relay changes (specifically moving one or more athlete from one position to another) from being saved.

---

Version 2.7.0 (Desktop and Web)
May 16, 2019 8:28pm CDT
Download Latest Desktop Installer

---

Version 2.6.0 (Desktop App)
May 11, 2019 11:58am CDT
Download Latest Desktop Installer

THIS RELEASE (OR LATER) IS CRITICAL FOR DOLPHIN 5 COMPATIBILITY

May 10, 2019 10:01am CDT

1. Fixed issue in Heat Sheet when paginated by Team & Age Group. Was previously showing all athletes on team in a heat, if any athlete in the team matched the target age group.
2. Added feature to show warning if two watches are input and are greater than time tolerance from each other (default 0.3 seconds)

---

Version 2.5.11 (Web & Desktop App)
May 8, 2019 6:40pm CDT

1. Re-added the ability to edit the heat/lane in individual/athlete entries
2. Fixed time zone issue that threw off the heat start times
3. Fixed a few smaller bugs, including one that could on occasion result in a time not being scored on the server

---